Double-pocket doors are one of our favorite things to use in our homes, but finding the right double-pocket door hardware can be a little complicated.

Double pocket doors are like French doors in that they provide a unique look to the overall design of the space in which they are used while requiring their own unique door handles and locks.

If you've never used them before, finding the right hardware can sometimes be frustrating and confusing when it comes to dual pocket doors, which is why I've decided this is an important topic to discuss today.

Below we've collected tips for choosing a double pocket door to give you some ideas as you search for your perfect fit.

Double pocket doors or French pocket doors are when two pocket doors are installed so that when they are closed, the doors meet in the center of the opening between them.

This is achieved by installing a pocket door frame on either side of the door opening so that two slab doors can be installed in each frame within the wall. Each door can then be operated independently to open and close.

Double or French doors are your favorite options when you want a larger opening than a single standard door. Having larger openings can create a more grand or luxurious look in the overall design of the space.

In fact, double-pocket doors are perfect for use in tight spaces where typical French doors are not possible because the swing of the door could knock things into or otherwise obstruct the function of the space.

There are many places where dual pocket doors are suitable, such as offices, bathrooms, and home gym spaces. Anywhere that would benefit from a larger opening and the door doesn't have to swing is a great option!

When deciding where to use dual pocket doors, it is important to consider the following:

In order to place a pocket door frame in wall space, it needs to be free of any plumbing, electrical or HVAC.

Typical locations are unlikely to have any electrical equipment because of the frame, so you need to think about where you can put the switch, or how far into the room you might have to walk to turn on the light. In some cases, walls can be built deeper to accommodate electrical equipment, but be sure to check with your contractor or electrician to see if this is possible.

If the door frame is on the wall, you won't be able to hang anything to the wall with nails or screws, as the nails or screws may go deep enough to interfere with the use of the door.

When installing locking dual-pocket door hardware, you'll typically install a privacy feature on one door and a bumper on the other - that's how the doors lock together.

Installation is similar to a locking handle without a lock on one side. Usually, as an edge pull, you can grab the inside of the door and pull the door out of the frame.

Handles are installed on both sides of the door as a way to grab the door and pull it open or closed. Using only flat pulls and no edge pulls is generally not preferable, as pocket doors can be difficult to use if they are pushed all the way in.

There are really only two main things you need to know when choosing your pocket door hardware.

First, you'll want to know the thickness of the door. This is important to make sure you buy the right dual pocket door handle for your door.

Second, you need to choose the type of handle. If you're using it in a bathroom, office, or other room where privacy is required, a lockable handle may be preferred.

Once you know these things, your decision will be greatly narrowed!

It's important to remember that pocket doors are suspended from rails inside the wall, which means they usually move a little bit from side to side.

This movement can mean lining up doors perfectly, especially when locking them, and it takes some practice. Don't worry too much if it takes you a while to get used to the feeling of lining them up when you close them!

If closing the door is still difficult, consider having the installer loosen or tighten the rails to help change the swing of the door.

Dual pocket doors may not be the most common thing, but they are a great solution for many situations where standard swing doors are not an option. If you decide to go with a dual pocket door, choosing hardware is no longer a daunting task. I hope this information sheds light on the mystery of finding double-pocket door hardware and handles! If you need a double pocket door or pocket door hardware, welcome to contact us.

Wekis is a professional custom sliding door hardware manufacturer. For 18 years, we have been focusing on the research and development, design and manufacture of furniture hardware and sliding door hardware. The 10,000-square-meter factory has automated production lines including a laser cutting center and a robotic welding center. We provide professional customized solutions for various hardware products to customers from all over the world.