Dealing with pocket door trim and hardware is a process in itself. All you need are a few simple tools, an operating guide, and your hands. You might even congratulate yourself when the job is done.

In this article, we will give you a detailed how-to guide on fixing folding doors.

We'll also share valuable tips and tricks you can use to make the experience less tedious. So grab your tools and let's get to work!

There are many factors to consider when dealing with an off-track folding door. Is the track monorail, full track or overhead track? What kind of pocket door are you dealing with? Is there a glitch with pocket door hardware, coat hangers, wheel assemblies, metal roller brackets, trolley bolt heads, latches, or locks?

There is a lot to think about. Generally speaking, the process is to take the folding door from the track and place it in the appropriate wheel assembly. But before we do that, we need to use certain tools to make sure the job is done correctly.

You'll need to evaluate if the folding door is falling off the track, getting stuck, or needs a little oil on the wheels to slide more smoothly.

In this step-by-step guide, we'll show you how to fix an off-track folding door.

This method will walk you through preparations, procedures, prevention recommendations, and possible recommended products.

Prepare the lube for the wheels. You can use multi-purpose drip oil products.

You'll need a pair of pliers, a power drill or screwdriver, and a door stop that can fit under the door.

Note that you should only use this method if you can clearly see the door tracks and wheels.

Lubricate the wheels with a drip product to ensure they can move more easily.

Run your finger down the track to make sure the track is smooth and free of deformities such as bends or slight dents.

If you do feel warped, repair it by gently squeezing the track back to normal with pliers.

Use a drill or screwdriver to remove the screws from the track so you can lower it.

After lowering the track, put the wheels back in place.

When the wheels are back on the track, push the door back and place the stopper under the door to secure it.

When the plug supports the door, use a screwdriver or drill to put the screw back into the track.

Close the door, get access to the rear wheels, and spray the rear wheels with drip product.

With folding doors, it's always best to make sure the wheels are well-lubricated at all times.

This prevents them from damaging the track by constantly sliding on it, causing friction.

When the wheel is well lubricated, it also keeps the wheel well-aligned, reducing the chance of kicking the wheel off the track or getting stuck.

Even if your wheels and tracks run smoothly after lubricating, there's one thing to check: You want to make sure the wheels are flush with each other on each side of the door.

This allows for a smooth alignment (easier to open and close) but also prevents one side of the door from jumping off the track.

The above briefly introduces the steps to fix a pocket door that is off track, if you want to buy new pocket door hardware, please contact us.

Wekis Hardware is a professional custom sliding door hardware manufacturer with 18 years of experience. We focus on the R&D, design, and manufacture of furniture hardware and sliding door hardware. The 10,000-square-meter factory has automated production lines including a laser cutting center and a robotic welding center. We provide professional customized solutions for various hardware products to customers from all over the world.