year

Search This Supplers Products:Barn door hardware and Furniture hardwareSliding door hardware wholesaleFurniture legs wholesaleShelf bracketHandles and knobsDoor Handle Accessories

Home Categories Store home Product list Custom Barn Door HardwareBi-fold Barn Door Hardware

Double Bifold Barn Door Hardware Kit

group name: Bi-fold Barn Door Hardware

Min Order: 50 piece

brand name: WEKIS Furniture&Sliding Door Hardware Manufacturer

model: M00310

Nearest port for product export: Nansha Port, Yantian Port

Delivery clauses under the trade mode: FOB, CFR, CIF, EXW, DDP, DDU, Express Delivery

Acceptable payment methods: T/T, PayPal, Cash

update time: Sat, 23 Nov 2024 17:42:29 GMT

contact supplier

Paramtents

Material Steel
Finishing Satin Black
Qty/ctn 1 set
Carton size L: 204 W: 22 H: 8.5
Remark Remark
CBM/ctn 0.038

Packging & Delivery

Min Order50 piece

Briefing

WEKIS Double Bifold Barn Door Hardware Kit slides smoothly and quietly with long time life span.

Detailed

Product Detailed Parameters

Item no	M00310
Finishing	Satin Black
Remark	one-piece rail packed
Material	Steel
Description	Barn Door Track,6mm thickness,2x Door Stoppers,2x Door Hangers,1x Floor Guide,2x Anti-jumpers,5sets x M10 Wall Mounted Screws and anchors,6x M10*60 Bolts for 40-45mm doors,1x Track Connector ,,1x Manual
Suitable door width	12'', 15'', 16'', 18'', 20''
Carton size	L: 204 W: 14 H: 8.5
CBM/ctn	0.038
G.W./ctn	8
N.W./ctn	7.4
MOQ(pcs)	Negotiable

Product Introduction

Double Bifold Barn Door Hardware Kit

Double Bifold Barn Door Hardware Kit is made of high-quality steel with premium nylon roller wheel and Gcr15 roller bearing, the surface is black matte, other color can be customized.

Push-pull opening and closing way saves lots of space which is quite suitable for classical decoration style.

Double Bifold Barn Door Hardware Kit

Features

STRONG & STURDY: High strength industrial grade tracks and pulleys can easily hold 220lbs loads,anti-corrosion and anti-rust.Maintains its beauty and longevity for many years.

Easy to Install: Attached with the most detailed product installation and operation instructions. and detailed graphical marking and measurement methods.You can install it by yourself.

Smoothly & Reduce Noise: Push and Pull the door very smoothly and effortlessly. Door stoppers with integrated spring, reduces vibration for quiet closing, door floor guide protects your door and. No punching on the ground.

Space Saving: Save space for opening and closing doors.

Suitable for interior door in kitchen, bedroom, dressing room, laundry room, utility room, entertainment console, club, pub and so on.

Package :

Spliced pre-drilled holes rails with full set installation screws rollers,

full set of L-Shaped Bracket

door stoppers

floor guide

Anti-Jump blocks

door panel is NOT INCLUDED

Please reserve 6'' space from the top of the door to the ceiling.

Installation of Double Bifold Barn Door Hardware Kit

Step 1

Rail installation

Note:

*Do not mount the rail spacers directly onto drywall.

*Solid wooden headerboard is required for following cases:

-the holes on the rail do not line up with studs.

-the openning has thick frame/baseboard (the gap between

door & wall only has 1/4”~3/8").

1. Location of center of the rail=

height of the door+115/16".

2. Using a level,lightly score a level pencil line on the wall/headerboard where the center of the rail spacers will be fastened into,mark a line.

3. Drill fastener holes on the wall/(headerboard).

4. Mount the rail using the supplied lag screws,

washers and rail spacers.

Step 2

Installating the hardware on the doors

(Fit door thickness: 1"-1-5/8" )

1.Installing 3 hinges on the back of the doors.

2.Installing top connector plate onto the door.

*Aligns the top connector plate with the edge of the door.

Mark the screw holes on the top of the door and drill holes.

Tight the screws to get plates installed.

3. Installing the brass sleeve on the bottom of the door

*Drill a hole on the bottom of the door,

measure 13/8" from the bottom edge of the door and 3/4" from the front of the door.

*Using a 5/8" spade bit of forstner bit,drill a 7/8" deep hole and insert the brass sleeve.

Step 3

Hanging the doors on the rail

In order to determine the proper location for the bottom pivot plate,the doors must first be hung on the rail at the desired position in reference to the openning.

1. Pull forward to engage the top connector plate on the top of the door with the fixed roller and the adjustable roller.

*Be sure the set screw on the side of each roller is backed out so that it does not protrude into the slot openning

2. Lift the doors up and hang on the track.

3. Close the door and let the door cover the openning to find the best location for fixed roller.

4. Lock the fixed roller onto the rail by set hardware.

Step 4

Installing the bottom pivot plate

The location of this bottom pivot plate is critical for proper function of the bifold barn door.

1. Pull out the bottom of the door slightly and insert the bottom pivot plate into the brass sleeve located in the bottom of the fixed position door,reposition the door.

2. Using a level,plumb the door and mark the position of the bottom pivot plate on the floor(from edge and outside edge).

3. Put the bottom pivot plate on the marks and drill holes,secure the floor using the supplied screws.

4. Take the doors off the rail by removing the set screw on the fixed roller,insert the bottom pivot plate into the brass Sleeve,then re-hang the doors on the rail.

Step 5: Installing strip seal

Downlod Installation Munaul

of Double Bifold Barn Door Hardware Kit

Installation Manual- Bifold Barn Door

What we can do for you?

If the above model is not suitable for your workpiece, please tell us your need and then we can send you the most satisfying drawing.: contact us